Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-CURRENT #2: Sat Aug 21 00:15:33 CEST 2004 nobody@localhost:/usr/src/sys/i386/compile/T5 Preloaded elf kernel "/boot/kernel/kernel" at 0xc070c000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc070c200. Calibrating clock(s) ... i8254 clock: 1193184 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 598063091 Hz CPU: Intel(R) Pentium(R) M processor 1500MHz (598.06-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x695 Stepping = 5 Features=0xa7e9f9bf real memory = 536674304 (511 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000826000 - 0x000000001f694fff, 518451200 bytes (126575 pages) avail memory = 519639040 (495 MB) bios32: Found BIOS32 Service Directory header at 0xc00fa000 bios32: Entry = 0xf0000 (c00f0000) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0x31f pnpbios: Found PnP BIOS data at 0xc00f4040 pnpbios: Entry = f0000:406e Rev = 1.0 pnpbios: Event flag at f4066 pnpbios: OEM ID 6008110e Other BIOS signatures found: random: mem: Pentium Pro MTRR support enabled io: null: npx0: [FAST] npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x80010014 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=33408086) pcibios: BIOS version 2.10 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 1 dev 0 func 0 acpi0: [MPSAFE] acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 0 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 2 dev 4 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 31 func 6 acpi0: Power Button (fixed) atpic: Programming IRQ9 as level/low acpi_ec0: port 0x66,0x62 on acpi0 acpi_ec0: info: new max delay is 90 us acpi_ec0: info: new max delay is 270 us acpi_ec0: info: new max delay is 560 us acpi_ec0: info: new max delay is 710 us acpi_ec0: info: new max delay is 11000 us ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 ACPI PCI link initial configuration: \\_SB_.C046.C0C2 irq 0: [ 5 10] 10+ low,level,sharable 0.29.0 \\_SB_.C046.C0C5 irq 0: [ 5 10] 5+ low,level,sharable 0.29.1 \\_SB_.C046.C0C4 irq 0: [ 5 10] 5+ low,level,sharable 0.29.2 \\_SB_.C046.C0C9 irq 0: [ 5 10] 5+ low,level,sharable 0.29.3 \\_SB_.C046.C0C4 irq 0: [ 5 10] 5+ low,level,sharable 0.31.0 \\_SB_.C046.C0C3 irq 0: [ 5 10] 10+ low,level,sharable 0.31.1 pci0: on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base b0000000, size 28, enabled found-> vendor=0x8086, dev=0x3340, revid=0x03 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3341, revid=0x03 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x80 (3840 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 000048c0, size 5, enabled pcib0: matched entry for 0.29.INTA (src \\_SB_.C046.C0C2) pcib0: possible interrupts: 5 10 ACPI PCI link arbitrated settings: \\_SB_.C046.C0C4 (references 2, priority 170): interrupts: 10 5 penalty: 60 110 \\_SB_.C046.C0C2 (references 1, priority 85): interrupts: 10 5 penalty: 60 110 \\_SB_.C046.C0C5 (references 1, priority 85): interrupts: 10 5 penalty: 60 110 \\_SB_.C046.C0C9 (references 1, priority 85): interrupts: 10 5 penalty: 60 110 \\_SB_.C046.C0C3 (references 1, priority 85): interrupts: 10 5 penalty: 60 110 pcib0: slot 29 INTA routed to irq 10 via \\_SB_.C046.C0C2 found-> vendor=0x8086, dev=0x24c2, revid=0x01 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[20]: type 4, range 32, base 000048e0, size 5, enabled pcib0: matched entry for 0.29.INTB (src \\_SB_.C046.C0C5) pcib0: possible interrupts: 5 10 ACPI PCI link arbitrated settings: \\_SB_.C046.C0C4 (references 2, priority 300): interrupts: 10 5 penalty: 130 170 \\_SB_.C046.C0C5 (references 1, priority 150): interrupts: 10 5 penalty: 130 170 \\_SB_.C046.C0C9 (references 1, priority 150): interrupts: 10 5 penalty: 130 170 \\_SB_.C046.C0C3 (references 1, priority 150): interrupts: 10 5 penalty: 130 170 pcib0: slot 29 INTB routed to irq 5 via \\_SB_.C046.C0C5 found-> vendor=0x8086, dev=0x24c4, revid=0x01 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 map[20]: type 4, range 32, base 00004c00, size 5, enabled pcib0: matched entry for 0.29.INTC (src \\_SB_.C046.C0C4) pcib0: possible interrupts: 5 10 ACPI PCI link arbitrated settings: \\_SB_.C046.C0C4 (references 2, priority 430): interrupts: 10 5 penalty: 190 240 \\_SB_.C046.C0C9 (references 1, priority 215): interrupts: 10 5 penalty: 190 240 \\_SB_.C046.C0C3 (references 1, priority 215): interrupts: 10 5 penalty: 190 240 pcib0: slot 29 INTC routed to irq 5 via \\_SB_.C046.C0C4 found-> vendor=0x8086, dev=0x24c7, revid=0x01 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=5 map[10]: type 1, range 32, base a0000000, size 10, enabled pcib0: matched entry for 0.29.INTD (src \\_SB_.C046.C0C9) pcib0: possible interrupts: 5 10 ACPI PCI link arbitrated settings: \\_SB_.C046.C0C9 (references 1, priority 285): interrupts: 10 5 penalty: 250 320 \\_SB_.C046.C0C3 (references 1, priority 285): interrupts: 10 5 penalty: 250 320 pcib0: slot 29 INTD routed to irq 5 via \\_SB_.C046.C0C9 found-> vendor=0x8086, dev=0x24cd, revid=0x01 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=5 powerspec 2 supports D0 D3 current D0 found-> vendor=0x8086, dev=0x2448, revid=0x81 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x8080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24cc, revid=0x01 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 00004c40, size 4, enabled pcib0: matched entry for 0.31.INTA (src \\_SB_.C046.C0C4) pcib0: slot 31 INTA is already routed to irq 5 found-> vendor=0x8086, dev=0x24ca, revid=0x01 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 map[20]: type 4, range 32, base 00004c20, size 5, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.C046.C0C3) pcib0: possible interrupts: 5 10 ACPI PCI link arbitrated settings: \\_SB_.C046.C0C3 (references 1, priority 350): interrupts: 10 5 penalty: 310 390 pcib0: slot 31 INTB routed to irq 10 via \\_SB_.C046.C0C3 found-> vendor=0x8086, dev=0x24c3, revid=0x01 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[10]: type 4, range 32, base 00004000, size 8, enabled map[14]: type 4, range 32, base 00004880, size 6, enabled map[18]: type 1, range 32, base a0200000, size 9, enabled map[1c]: type 1, range 32, base a0300000, size 8, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.C046.C0C3) pcib0: slot 31 INTB is already routed to irq 10 found-> vendor=0x8086, dev=0x24c5, revid=0x01 bus=0, slot=31, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 00004400, size 8, enabled map[14]: type 4, range 32, base 00004800, size 7, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.C046.C0C3) pcib0: slot 31 INTB is already routed to irq 10 found-> vendor=0x8086, dev=0x24c6, revid=0x01 bus=0, slot=31, func=6 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 2 supports D0 D3 current D0 agp0: mem 0xb0000000-0xbfffffff at device 0.0 on pci0 agp0: Reserved 0x10000000 bytes for rid 0x10 type 3 at 0xb0000000 agp0: allocating GATT for aperture of size 256M pcib1: at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x3000-0x3fff pcib1: memory decode 0x90400000-0x904fffff pcib1: prefetched decode 0x98000000-0x9fffffff ACPI PCI link initial configuration: \\_SB_.C046.C0C2 irq*10: [ 5 10] 10+ low,level,sharable 1.0.0 pci1: on pcib1 pci1: physical bus=1 map[10]: type 3, range 32, base 98000000, size 27, enabled pcib1: device (null) requested decoded memory range 0x98000000-0x9fffffff map[14]: type 4, range 32, base 00003000, size 8, enabled pcib1: device (null) requested decoded I/O range 0x3000-0x30ff map[18]: type 1, range 32, base 90400000, size 16, enabled pcib1: device (null) requested decoded memory range 0x90400000-0x9040ffff pcib1: matched entry for 1.0.INTA (src \\_SB_.C046.C0C2) pcib1: slot 0 INTA is already routed to irq 10 found-> vendor=0x1002, dev=0x4c66, revid=0x01 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0083, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x80 (3840 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 pci1: at device 0.0 (no driver attached) pci0: at device 29.0 (no driver attached) pci0: at device 29.1 (no driver attached) pci0: at device 29.2 (no driver attached) pci0: at device 29.7 (no driver attached) pcib2: at device 30.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 3 pcib2: I/O decode 0x2000-0x2fff pcib2: memory decode 0x90000000-0x903fffff pcib2: prefetched decode 0xfff00000-0xfffff pcib2: Subtractively decoded bridge. ACPI PCI link initial configuration: \\_SB_.C046.C0C2 irq*10: [ 5 10] 10+ low,level,sharable 2.0.0 \\_SB_.C046.C0C3 irq*10: [ 5 10] 10+ low,level,sharable 2.1.0 \\_SB_.C046.C0C5 irq* 5: [ 5 10] 5+ low,level,sharable 2.2.0 \\_SB_.C046.C0C4 irq* 5: [ 5 10] 5+ low,level,sharable 2.4.0 \\_SB_.C046.C0C5 irq* 5: [ 5 10] 5+ low,level,sharable 2.6.0 pci2: on pcib2 pci2: physical bus=2 map[10]: type 1, range 32, base 90200000, size 11, enabled pcib2: device (null) requested decoded memory range 0x90200000-0x902007ff map[14]: type 4, range 32, base 00002400, size 7, enabled pcib2: device (null) requested decoded I/O range 0x2400-0x247f pcib2: matched entry for 2.0.INTA (src \\_SB_.C046.C0C2) pcib2: slot 0 INTA is already routed to irq 10 found-> vendor=0x1106, dev=0x3044, revid=0x80 bus=2, slot=0, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x80 (3840 ns), mingnt=0x00 (0 ns), maxlat=0x20 (8000 ns) intpin=a, irq=10 powerspec 2 supports D0 D2 D3 current D0 map[10]: type 4, range 32, base 00002000, size 8, enabled pcib2: device (null) requested decoded I/O range 0x2000-0x20ff map[14]: type 1, range 32, base 90300000, size 8, enabled pcib2: device (null) requested decoded memory range 0x90300000-0x903000ff pcib2: matched entry for 2.1.INTA (src \\_SB_.C046.C0C3) pcib2: slot 1 INTA is already routed to irq 10 found-> vendor=0x10ec, dev=0x8139, revid=0x20 bus=2, slot=1, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x80 (3840 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 90000000, size 12, enabled pcib2: device (null) requested decoded memory range 0x90000000-0x90000fff pcib2: matched entry for 2.2.INTA (src \\_SB_.C046.C0C5) pcib2: slot 2 INTA is already routed to irq 5 found-> vendor=0x8086, dev=0x1043, revid=0x04 bus=2, slot=2, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x80 (3840 ns), mingnt=0x02 (500 ns), maxlat=0x22 (8500 ns) intpin=a, irq=5 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base 90100000, size 12, enabled pcib2: device (null) requested decoded memory range 0x90100000-0x90100fff pcib2: matched entry for 2.4.INTA (src \\_SB_.C046.C0C4) pcib2: slot 4 INTA is already routed to irq 5 found-> vendor=0x1524, dev=0x1410, revid=0x01 bus=2, slot=4, func=0 class=06-07-00, hdrtype=0x02, mfdev=0 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x80 (3840 ns), mingnt=0xc4 (49000 ns), maxlat=0x03 (750 ns) intpin=a, irq=5 powerspec 1 supports D0 D1 D2 D3 current D0 pci2: at device 0.0 (no driver attached) pci2: at device 1.0 (no driver attached) pci2: at device 2.0 (no driver attached) pci2: at device 4.0 (no driver attached) isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x4c40-0x4c4f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 5 at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x4c40 ata0: channel #0 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1 ata0: [MPSAFE] ata1: channel #1 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x00 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=00 devices=0x4 ata1: [MPSAFE] pci0: at device 31.3 (no driver attached) pci0: at device 31.5 (no driver attached) pci0: at device 31.6 (no driver attached) acpi_cmbat0: on acpi0 acpi_acad0: on acpi0 acpi_button0: on acpi0 acpi_lid0: on acpi0 atkbdc0: port 0x64,0x60 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0 irq 12 on acpi0 psm0: current command byte:0065 psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000000, packet size:4 psm0: syncmask:08, syncbits:08 ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: at iomem 0xc0000-0xcffff on isa0 sc0: on isa0 sc0: VGA <16 virtual consoles, flags=0x200> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k vga0: vga: WARNING: video mode switching is not fully supported on this adapter VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 4f 83 56 9a a5 1f 00 4f 0d 0e 00 00 07 80 91 87 8f 28 1f 8f a6 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 00 00 03 00 02 67 5f 4f 4f 83 56 9a a5 1f 00 4f 0d 0e 00 00 07 80 91 87 8f 28 1f 8f a6 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) ppc0 failed to probe at irq 7 on isa0 sio0 failed to probe at port 0x3f8 irq 4 flags 0x10 on isa0 sio1 failed to probe at port 0x2f8 irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 598063091 Hz quality 800 Timecounters tick every 10.000 msec IP Filter: v3.4.35 initialized. Default = block all, Logging = enabled lo0: bpf attached cpu0: set speed to 100.0% acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% acpi_cmbat0: battery initialization start acpi_acad0: acline initialization start system power profile changed to 'economy' acpi_acad0: Off Line acpi_acad0: acline initialization done, tried 1 times ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata0-master: setting PIO4 on Intel ICH4 chip ata0-master: setting UDMA100 on Intel ICH4 chip ad0: ATA-6 disk at ata0-master ad0: 38154MB (78140160 sectors), 77520 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 GEOM: new disk ad0 ata1-master: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin ATAPI_RESET time = 600us ata1-master: setting PIO4 on Intel ICH4 chip acpi_cmbat0: battery initialization done, tried 1 times [0] f:00 typ:7 s(CHS):0/1/1 e(CHS):175/254/63 s:63 l:19277937 [1] f:00 typ:5 s(CHS):655/0/1 e(CHS):767/254/63 s:59874255 l:18265905 [2] f:80 typ:165 s(CHS):176/0/1 e(CHS):812/254/63 s:19278000 l:10233405 [3] f:00 typ:169 s(CHS):1023/254/63 e(CHS):1023/254/63 s:46347525 l:9124920 GEOM: Configure ad0s1, start 32256 length 9870303744 end 9870335999 GEOM: Configure ad0s2, start 30655618560 length 9352143360 end 40007761919 GEOM: Configure ad0s3, start 9870336000 length 5239503360 end 15109839359 GEOM: Configure ad0s4, start 23729932800 length 4671959040 end 28401891839 MBREXT Slice 5 on ad0s2: [0] f:00 typ:11 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:2409687 [1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:2409750 l:610470 GEOM: Configure ad0s5, start 32256 length 1233759744 end 1233791999 MBREXT Slice 6 on ad0s2: [0] f:00 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:610407 [1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:3020220 l:1204875 GEOM: Configure ad0s6, start 1233824256 length 312528384 end 1546352639 MBREXT Slice 7 on ad0s2: [0] f:00 typ:130 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:1204812 [1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:4225095 l:13510665 GEOM: Configure ad0s7, start 1546384896 length 616863744 end 2163248639 MBREXT Slice 8 on ad0s2: [0] f:00 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:13510602 [1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:17735760 l:530145 GEOM: Configure ad0s8, start 2163280896 length 6917428224 end 9080709119 MBREXT Slice 9 on ad0s2: [0] f:00 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:530082 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s9, start 9080741376 length 271401984 end 9352143359 GEOM: Configure ad0s3a, start 0 length 157286400 end 157286399 GEOM: Configure ad0s3b, start 157286400 length 698351616 end 855638015 GEOM: Configure ad0s3c, start 0 length 5239503360 end 5239503359 GEOM: Configure ad0s3d, start 855638016 length 314572800 end 1170210815 GEOM: Configure ad0s3e, start 1170210816 length 209715200 end 1379926015 GEOM: Configure ad0s3f, start 1379926016 length 314572800 end 1694498815 GEOM: Configure ad0s3g, start 1694498816 length 3545004544 end 5239503359 Mounting root from ufs:/dev/ad0s3a WARNING: / was not properly dismounted start_init: trying /sbin/init WARNING: /home was not properly dismounted WARNING: /tmp was not properly dismounted WARNING: /usr was not properly dismounted WARNING: /var was not properly dismounted